Features:
Advance Sinewave LCD UPS based Technology- Modular Design and Compact Size
- High Performance, High efficient after Sales Support
- Advanced MOSFET based Technology.
- Built in Aotomatic Voltage Stablizer.
- Constant Voltage current controlled Charging circuit
- Protection for short circuit, Over load, battery low & Over Charge.
- Mains High and low cut off.
- Manual by pass
TECHNICAL SPECIFICATION
| ON MAINS | |
| Input | |
| Normal Voltage | 220V Single Phase & N |
| Input Voltage Window | ( -20% to + 15% ) |
| Normal Frequency | 50 Hz + 6% |
| Output. | |
| Output Voltage | 220V Single Phase & N |
| BATTERY | |
| DC Bus bar voltage | 12V – 120 VDC |
| Load Power factor | 0.8 lag to unity |
| Nominal Voltage | 220VAC Single phase. |
| Regulation | (+) 5% |
| Frequency | 50Hz +0.1 Hz |
| Waveform | True sine wave |
| Total Harmonic Distortion |
<2% Minimum for linear load, <3% for non linear load |
| Overload Capacity |
125% for 10 mins, 150% for 60 Secs |
| Inverter Type | PWM |
| Transient Response | Remain within + 5% & recover to 98% within one cycle |
| Crest Factor | 3:1 |
| Duty | Continuous |
| Changeover Time | 20-30ms |
| EFFICIENCY | |
|
Invertor Efficiency ( DC to AC ) |
>90% |
|
PROTECTIONS
|
Input under / Over Voltage Battery low Battery Charging Current Limit Output Under Voltage Output Over Voltage Output Overload Output Short Circuit |
*Customised UPS can be manufactured